Tray With Emboss Stencil Design And Decoupage Coasters
You Will Need:
Fevicryl Acrylic Colour Black 02 , Fevicryl 3 D Outliner Red 701, Yellow 703, White 707, Fevicryl Modge Podge Gloss, Fine Art Brushes
Description :
How beautiful is this combo of serving tray and coasters made using Fevicryl products! This combo is sure to add a festive feel while entertaining the guests at home and can make for a nice handmade gifting option too.
• We are going to make the tray with emboss design with 3 D outliner along with the coasters with Mysore Ganjifa design.
• Take a plain wooden tray.
• Paint the tray with the base coat of Acrylic Colour Black 02.
• Let it dry.
• We are going to make the stencil design for the tray.
• Take A4 white paper draw the geometrical design on it in the size of the inner side of the tray.
• Place the OHP sheet on it and mark the design with CD marker.
• Cut the stencil design with a paper cutter.
• Place the stencil design in the tray, pour the 3 D Outliner Yellow 703 beside the design on the OHP sheet and drag the 3 D on the design with thick card paper.
• Remove the stencil carefully.
• Let it dry completely.
• Refer to the image.
• Similarly paint 2 more such trays using Acrylic Colour Black 02 , 3 D Outliner Red 701 and White 707.
• Let it dry.
• Take the round MDF coasters measuring 3 ½” diameter approximately.
• Take the colour print of Mysore Ganjifa on the paper in the size of the coastrers.
• Mark and cut the print in the size of the coasters with a pair of the scissors.
• Stick the circular print of the Ganjifa design on the coasters using Modge Podge Gloss by removing the air pockets carefully.
• Let it dry.
• Apply two to three coats of Modge Podge Gloss on the print to secure the design.
• Leave it to dry.
• Refer to the image.
+91 99676 55545