Robot Car Dangler
You Will Need:
Fevicryl Acrylic Colours Burnt Sienna 01, Black 02, Lemon Yellow 11, Turquoise Blue 22, White 27, Salmon Pink 65, Fevicryl Acrylic Colour Pearl Metallic Bronze 355, Fevicryl Mouldit, Fevicryl Fabric Glue, Fine Art Brushes, Corrugated Boxes, Corrugated Box Flaps, Pencil, Paper Cutter, Scissors, Black Cord, Key Chain Ring, Colour Palette, Water Container
Product Used:
Description :
A cool handmade gift for a cool dad this is! Made with things around you this one is sure to bring a smile to your dad’s face.
STEP 1 : Source the base
- We are going to make a robot with corrugated box flap and Mouldit to gift to dad for his car or for the office table or pin board.
- Take the corrugated box flap.
- Mark and cut the box to make a rectangular body and a square shape box to make the head of the robot.
- Refer to the image.
STEP 2 : Mix Fevicryl Mouldit
- We are going to make the hands, the legs, the signal receiving antenna on the head with Mouldit.
- Take Mouldit resin base and hardener, mix it thoroughly to make even dough.
STEP 3 : Mould the parts
- Take the dough to make the hands, the legs, the signal receiving antenna on the head and screw like buttons to join the body parts.
- Stick the body parts appropriately to the robot using Fabric Glue.
- Refer to the image.
STEP 4 : Paint the robots
- Paint the robot with Acrylic Colours Burnt Sienna 01, Black 02, Lemon Yellow 11, Turquoise Blue 22, White 27, Salmon Pink 65 and Pearl Metallic Bronze 355.
- Leave it to dry completely.
STEP 5 : Attachment.
- Attach the black cord and the key chain ring to the end of the thread to dangle it in the car or on the pin board.
+91 99676 55545