Ring Wall Hanging

Home Do-It-Yourself Fabric Craft Ring Wall Hanging

Fabric Craft

By Hobbyideas Team

You Will Need:

Fevicryl Fabric Glue Premium, Fevicryl Fabric Colour ( Black, White,Prussian Blue, Cerulean Blue, Violet), Pencil, Scale, Measuring Tape, Paper, Carbon Sheet, Tracing Paper, Fabric Chalk, Fabric Scissors, Barbeque Stick, 24 Wooden Rings (12”), Casement Fabric In 2 Shades, Buckram, Cotton Fabric (Black, White), Embellishments (Black Stone In Different Shapes And Sizes, Black Sequin, Black Beads, Black Poth And Cutdana)

Product Used:

Description :

Here is an amazing DIY of a Wall Hanging with wooden rings and fabric that has been made using Fevicryl Fabric Glue.

STEP 1 : Source the base

Take 6 rings and stick them together
Use Fevicryl Fabric glue to stick them
Let it dry
Make 4 such bundles altogether.

STEP 2 : Pocket material

Take casement fabric, measure half of the ring and draw that on to the fabric.
Make 8 such pieces.
Reduce 1” from the straight side of the piece on 4 half circles.
These pieces will come in the front
The rest will be placed at the back of the circle
Make sure to leave 1 cm on all sides for finishing.

STEP 3 : Cut the strips

Measure the width and ½ length along the peripheri of the 6 ring unit and cut fabric according to the measurements.
Make sure to leave 1 cm on all sides for finishing.

STEP 4 : Make the set

For each circle unit you will have a strip, front half circle and back half circle.

STEP 5 : Stick the strip

Stick the strip on the rings as shown
Use Fevicryl Fabric glue to stick them
Let it dry
Do this on all the ring units.

STEP 6 : Attachment of rings

Take 1”x 5” long casement strips and stick them as shown in the image
Use Fevicryl Fabric glue to stick them
Let it dry
Make sure 2 diagonal ring units have the fabric part at the bottom and the remaining 2 will have the fabric on the opposite sides to each other.

STEP 7 : Final ring unit set up

This is how the set up must look once you have all the units stuck together.

STEP 8 : Finishing the pocket

Fold the edges as shown in the image for a good finish for the pockets
Use Fevicryl Fabric glue to stick them
Let it dry

STEP 9 : Base material for surface design

Take cotton fabric in various colours as shown.

STEP 10 : Tracing design

Trace out flowers and leaves of different sizes as shown in the image.
Use white carbon paper to transfer the design on to the fabric.
Cut them using fabric scissors

STEP 11 : Combining flowers

Combine the different size of flowers as shown
Use Fevicryl Fabric glue to stick them
Let it dry

STEP 12 : Cut the leaves

Leaves in different shapes and sizes

STEP 13 : Embellishments

Take embellishments like tikli, beads, cutdana, poth and stone in shades of black, grey

STEP 14 : Sticking on surface

Take the materials and stick them on the semi circles we have ready.
Make two sets of flower pockets and two of leaves.
Use Fevicryl Fabric glue to stick them
Let it dry

STEP 15 : Sticking of the semi circles

Stick the semi circles on to the ring units as shown.
The embellished pieces come in the front and the plain pieces go at the back.
Use Fevicryl Fabric glue to stick them
Let it dry
Take thick cotton cord and create a loop at the top of the ring units for hanging.

STEP 16 : Final look

The ring wall hanging is ready to be hung on ur wall and store books, pens,brouchers, keys, flowers, leaves etc!

Hello, Guest