Holi Pull Out Card
You Will Need:
Fevicryl 3D outliner Non sticky – White 301, Fevicryl Glass Colours, Fabric glue, Fevicryl Neon Colours Orange, Yellow, Green and Pink, Fevicryl Acrylic Colour Black 02, White card paper, A4 Sized OHP Sheet, Scissors, A4 size paper, Scale, Pencil, Paper cutter, Fevicol Mr.
Description :
Wish you loved one with this handmade colourful card this Holi. The more the colour, the more the joy!STEP 1
Take an A4 size white card paper and fold it into two.
Cut a window leaving 1 inch from all the sides with a paper cutter.
STEP 2
Stick the bottom edge and one side of the card paper using Fevicol MR; it will result in a pocket.
Write Happy Holi in the window with a pencil.
STEP 3
Colour the typography with Fevicryl Neon Colours and border them with Fevicryl Acrylic Colour Black 02.
STEP 4
Cut the OHP in the size of the card and make random pattern on it using Fevicryl 3D outliner Non sticky – White 301 in the size of the card window, as shown in the image.
Leave it to dry
STEP 5
Fill Fevicryl glass colours in the pattern; refer the image.
Let it dry.
STEP 6
After drying invert the OHP sheet and stick in on a card paper. This card paper should an inch longer than the length of the card.
STEP 7
Make a paper tongue from the extra card paper as shown in the image.
STEP 8
Make small pichkaris on the card and colour them with Fevicryl Acrylic Neon Orange.
Colour the base with Fevicryl Acrylic Colour Black 02.
STEP 9
The pull out card is ready.
+91 99676 55545