• Take a small piece of buckram measuring 1.5” x 9.5” as seen in the image given.

• Take a small piece of cotton silk fabric measuring 4” x 10.5” as seen in the image given.
• Take the buckram piece previously cut and stick it on to the cotton silk fabric as seen in the image
• Use Fevicryl Fabric Glue to stick.
• Let it dry.

• Fold the sides of the cotton silk fabric as shown
• Fold the bottom part on to the buckram .
• Apply Fevicryl Fabric Glue on it and fold the top part on it.
• Give it a good finish by folding the edges as well
• Let it dry.

• Once the purple strip has dried, turn it around and draw diamonds on the surface as seen in the image using a fabric pencil.

• Take thin gold gota lace and stick them on the purple strip as seen in the image.
• Take tear drop gota pieces, pearls and stick them on the strip
• Stick them using Fevicryl Fabric Glue.
• Let it dry.

• Take a small piece of cotton silk fabric measuring 1.5” in width and 30” in length.

• Fold 0.5” from both sides to create a strip as seen in the image given
• Stick them using Fevicryl Fabric Glue.
• Let it dry
• Make 3 such strips

• Take gold gota strip and stick it on 2 of the fabric strip.
• Stick it using Fevicryl Fabric Glue
• Use fevicryl 3d outliner pearl white to create running stitch effect on the strip as seen
• Let it dry

• Take a lace with danglers and stick it at the back of the fabric piece as shown.
• Stick it using Fevicryl Fabric Glue
• Let it dry

• Place the 2 strips and the place a plain fabric at the back as shown.
• Stick it using Fevicryl Fabric Glue
• Let it dry

• Cut 2 fabric pieces measuring 1.5” x 1.5”
• Cut 3 pairs of these fabric pieces ( 2 for earrings & 1 for maang tika)

• Take 1 piece of buckram measuring 1.5” x 1.5” and draw a square inside it as shown in the image.

• Place the buckram piece on the fabric as shown.
• Stick it using Fevicryl Fabric Glue
• Let it dry

• Turn the piece around and Place the 2 strips of gota lace on the plain fabric at the front as shown.
• Stick it using Fevicryl Fabric Glue
• Let it dry

• Fold the sides of the fabric, stick teardrop gota pieces, pearl and plastic mirrors on the piece as shown in the image. 
• Stick it using Fevicryl Fabric Glue
• Let it dry

• Turn the piece , apply glue and place lace with danglers, a small ring at the top edge and a small ball of cotton as shown in the image.
• Once this is done cover the back with the plain fabric that was cut along with this piece.
• Stick it using Fevicryl Fabric Glue
• Let it dry

• Attach hooks on to the ring that was stuck on the back.
• The earring are ready.

• Take gold gota strip and stick it on the remaining fabric strip.
• Stick it using Fevicryl Fabric Glue
• Use Fevicryl 3D Outliner pearl white to create running stitch effect on the strip as seen
• Let it dry

• Take the remaining diamond piece with danglers and attach the leftover strip to it as shown.
• Use Fevicryl Fabric Glue to stick it
• Let it dry
• Using needle and thread stitch the hook on to the edge of the strip.

• Take the final leftover plain piece and stick it on the bottom piece as shown.
• Stick it using Fevicryl Fabric Glue
• Let it dry

This beautiful and elegant fabric jewellery is ready to be worn for the mehendi function by the bride or by anyone who fancies a handcrafted jewellery.