Home Do-It-Yourself Mixed Media 12 Days Of Ornament: 12 Lords A-Leaping

12 Days Of Ornament: 12 Lords A-Leaping

You Will Need:

Fevicryl Premium Fabric Glue, Fevicryl Glass Colours, Fevicryl 3D liners, OHP sheet, scissors, barbecue stick, clips, pencil, paper, ball chain [golden], zero size stone, beads, golden cut Dana, golden cord, 1 wooden button

Product Used:
Description :

Here is the first DIY of an amazing series of Christmas Ornaments; leaping lords' ornament that can be hung on the Christmas tree and has been made completely using Fevicryl Fabric Glue

STEP 1 : Make a sketch
  • Draw a leaping Lord as seen in the image above measuring 12cm.
  • Draw it on a tracing paper.
  • Trace this image onto a OHP sheet.
STEP 2 : Outline and cutting along the outline
  • Trace the design using a permanent marker
  • Make two such designs
  • Cut the design using scissors
STEP 3 : Paint with Glass Colours
  • Outline the design using Fevicryl 3D outliners
  • Let it dry
  • Color the design using Fevicryl Glass Colors as seen in the Image above.
  • Make sure to colour the opposite sides of the design and not the same side.
STEP 4 : Sticking of Embellishments
  • Stick embellishments on the cutouts as seen in the image given.
  • Use Fevicryl Fabric Glue to stick them.
  • let it dry
  • Use materials like tikli, cutdana, small stones to embellish the cutouts.
STEP 5 : Sticking the cutouts
  • Stick barbeque stick pieces measuring 1.5” on the cutouts as seen in the image given.
  • Secure them with OHP pieces as shown in the image
  • Use Fevicryl Fabric Glue to stick them.
  • Let it dry
  • The embellished side faces outwards.
STEP 6 : The standing look.
  • This is how the ornament will look from the front.
STEP 7 : Sticking the loop
  • Cut a gold cord measuring about 10 cm and attach it to the ornament near the sticks in between.
  • Use Fevicryl Fabric Glue to stick them.
  • Let it dry

The Lords a-leaping ornament is ready to be hung on the Christmas tree!